Paving Services Melbourne

Need a paved area installed, repaired or replaced? Get Handyman provides paving services across Melbourne for homeowners, landlords, property managers and commercial properties.

We can help with new paved areas as well as existing paving that has become uneven, loose, cracked or damaged. That can include a garden path, courtyard, patio, entertaining area, small driveway section or another outdoor area around your property.

If you already have the pavers, we can discuss the installation. If the existing paving needs to be lifted or the area needs preparation first, we can assess what is involved before the work starts.

Paving for the areas you actually use

Paving is often used to create a practical outdoor surface without having to cover an entire area with concrete.

The right approach depends on where the paving is going, how the area will be used and what condition the ground or existing surface is in.

Patios and outdoor entertaining areas

Paved patios can create a defined area for outdoor furniture, dining and entertaining.

We can install or replace paving around outdoor living areas, including smaller spaces where the existing surface needs to be refreshed or changed.

Garden paths and walkways

Loose, uneven or damaged pavers can make a garden path difficult to use and can also create trip points.

We can help with new garden paths, replacement pavers and repairs to sections that have moved or deteriorated.

Courtyards

Courtyards often have limited access and unusual shapes, which makes careful measuring and layout important.

If you are updating an existing courtyard, paving can also be used to replace an old or damaged surface without changing the entire outdoor space.

Driveways and paved access areas

Paved driveways and access areas need to cope with considerably more load than a simple garden path.

For smaller paving jobs, repairs or sections of an existing paved area, we can assess the condition of the surface and discuss what work is suitable.

Where a project involves substantial structural preparation, drainage work or specialist driveway construction, the scope can be assessed before proceeding.

Poolside and outdoor areas

Pavers are commonly used around pools and other outdoor areas where a hard surface is needed.

The material, surface condition, drainage and intended use all matter when deciding what is appropriate. We can discuss the work required for your particular area rather than assuming every paving job needs the same treatment.

New paving or repair the paving you already have?

Not every damaged paved area needs to be completely replaced.

A section may have moved because the base underneath has changed. Individual pavers may have cracked or broken while the surrounding area is still usable. In other cases, an older paved area may simply need to be lifted and relaid.

We can look at the existing condition and determine whether the job is more suited to:

• Replacing individual damaged pavers
• Repairing a section of paving
• Lifting and relaying existing pavers
• Replacing an entire paved area
• Installing new paving where there is currently no paved surface

Relaying can sometimes make more sense than starting again, particularly when the existing pavers are still in good condition.

The important part is finding out why the paving has moved or failed in the first place. Simply putting a loose paver back into position may not solve the problem underneath it.

Paving installation starts underneath the pavers

The visible part of a paving job is the finished surface. A large part of the work is what happens before the pavers are laid.

The existing area may need to be cleared and prepared before installation. Depending on the project, this can involve removing old materials, preparing the base, establishing suitable levels and creating the right surface for the pavers.

Poor preparation can contribute to movement, uneven surfaces and other problems later.

For this reason, the condition of the area underneath the existing paving is particularly important when we are repairing or relaying an old paved surface.

Pavers, patterns and the existing property

The appearance of the finished area depends on more than the colour of the pavers.

The size and shape of the pavers, laying pattern, edge details and surrounding property all affect how the finished area looks.

Depending on the project, paving may involve materials such as:

• Concrete pavers
• Brick pavers
• Natural stone
• Porcelain outdoor pavers
• Existing reclaimed pavers

Not every material is suitable for every application. The choice should take into account the location, expected use, existing surface and installation requirements.

If you are matching new pavers to an existing area, availability can also be a consideration. An exact match may not always be possible with older paving, so it is worth checking this before removing the existing surface.

Paving repairs around Melbourne homes

Some paving problems are easy to spot.

You may notice:

• Pavers that have sunk
• Areas that have become uneven
• Loose individual pavers
• Cracked or broken pavers
• Gaps between pavers
• Sections that have shifted
• An old path that no longer sits level
• Damaged paving around a patio or courtyard
• Pavers that need to be removed and relaid

The repair required depends on the cause.

For example, replacing one broken paver is very different from repairing an entire section that has settled. In the second situation, the surrounding pavers may need to be lifted so the area underneath can be corrected before the surface is relaid.

When old paving needs to come up

Sometimes the easiest way to understand a paving problem is to remove the affected section.

This can reveal issues that are not obvious from the surface. Existing pavers may look fine while the area underneath has changed over time.

If an old paved area is being replaced, we can assess the work involved in removing the existing material and preparing the area for the new surface.

This is particularly relevant when renovating an older outdoor area or changing the layout of a courtyard, path or patio.

Paving for rental properties and property maintenance

Paving problems can become noticeable when a property is being prepared for new tenants, sale or general maintenance.

A loose path, damaged courtyard or uneven paved section can make an otherwise well-maintained property look unfinished.

For landlords, property managers and homeowners preparing a property, paving work can be combined with other maintenance tasks where appropriate.

For example, the same property may need:

• Paving repairs
• Pressure cleaning
• Fence repairs
• Painting
• Door repairs
• General outdoor maintenance

This can be useful when several smaller jobs need attention before a property is ready for tenants, inspections or sale.

Small paving jobs are still worth assessing

Paving contractors often focus on large outdoor construction projects. But not every paving requirement involves a new driveway or a large backyard.

You may only need a damaged section repaired, a short garden path relaid or several loose pavers replaced.

If the work is within the scope of a handyman paving job, Get Handyman can assess the requirement and explain what is involved.

For larger landscaping, structural excavation, major drainage or extensive driveway projects, the job may require a more specialised paving or landscaping contractor.

Paving repairs versus pressure cleaning

Dirty pavers and damaged pavers are two different problems.

Pressure cleaning can remove dirt, grime, algae and other surface build-up from suitable outdoor paving. It will not, however, correct pavers that have sunk, shifted or become loose.

If your paving looks old because it is dirty, cleaning may be enough.

If the surface is physically uneven or damaged, paving repairs may be needed.

In some cases, both services can make sense. The paving can be repaired first and then the finished area cleaned once the work is complete.

What affects the cost of paving in Melbourne?

There is no useful single price for every paving job because the work can vary considerably from one property to another.

The main factors include:

• Size of the paved area
• Type and size of pavers
• Whether new pavers are being supplied
• Condition of the existing surface
• Whether old paving needs to be removed
• Amount of ground preparation required
• Access to the work area
• Number of cuts and edge details
• Whether existing pavers can be reused
• Condition of the base underneath
• Drainage or level issues
• Disposal of removed materials

A small repair involving a few accessible pavers is obviously different from removing and rebuilding an entire patio.

For that reason, it is better to assess the actual area rather than relying on a generic per-square-metre figure.

Have an existing paved area that needs attention?

You do not necessarily need to replace everything just because part of the paving looks damaged.

Send us a few photos of the area and explain what is happening. If possible, include:

• A photo showing the whole paved area
• Close-up photos of damaged or uneven sections
• Approximate dimensions
• The type of pavers, if known
• Whether you want repair, replacement or new paving
• Your Melbourne suburb

This gives us a much better starting point for understanding the job.

Paving services across Melbourne

Get Handyman provides handyman and property maintenance services across Melbourne.

Service areas include suburbs such as Melbourne CBD, Richmond, South Yarra, Hawthorn, Kew, Fitzroy, Toorak, Brighton, St Kilda, Camberwell, Point Cook, Werribee, Hoppers Crossing, Tarneit, Truganina, Wyndham Vale, Williams Landing, Caroline Springs, Deer Park, Melton, St Albans, Essendon, Doncaster, Burwood, Glen Iris, Thornbury and surrounding areas.

If you are unsure whether your suburb is covered, contact us with your location and the details of the paving work required.

Get a quote for paving work in Melbourne

Whether you need a few pavers repaired or you are planning a new paved area, start by telling us what needs to be done.

Send photos where possible, give us the approximate size of the area and tell us whether the paving is new, damaged or being replaced.

Get Handyman can then assess the job and advise on the next step.

Call Get Handyman on 0401 923 333 or email info@gethandyman.com.au to discuss your paving job in Melbourne.

Paving FAQs

Can you repair existing paving?

Yes. Depending on the condition, paving may be repaired by replacing damaged pavers, lifting and relaying sections or addressing the area underneath the affected paving.

Can you relay old pavers?

Existing pavers can sometimes be lifted and reused. Their condition and the condition of the area underneath them need to be checked first.

Do you install new paving?

Yes, where the project is suitable for the scope of the service. The preparation required will depend on the location, size and intended use of the paved area.

Can you pave a garden path?

Garden paths are a common paving application. The size, access and condition of the area will determine the work required.

Can you repair sunken pavers?

Sunken pavers may be repairable by lifting the affected section and correcting the underlying area before relaying the pavers. The cause of the movement needs to be considered.

Can you replace only a few damaged pavers?

In many cases, yes. If matching replacement pavers are available and the surrounding paving is in reasonable condition, individual pavers or small sections may be replaced.

Do you provide paving for rental properties?

Yes. Paving repairs and maintenance can be useful when preparing a rental property for new tenants, an inspection or general property maintenance.

Can you pressure clean paving as well?

Get Handyman also provides pressure cleaning services. Cleaning and paving repairs solve different problems, so the appropriate service depends on the condition of the surface.

How much does paving cost in Melbourne?

The price depends on the size of the area, materials, access, preparation, removal requirements and condition of the existing surface. Photos and measurements can help determine the likely scope of the work.