Curtain & Blind Installation Cost Melbourne

You can buy curtains or blinds online fairly easily. Getting them properly fitted is another matter.

The brackets need to go in the right place, the blind needs to sit square, curtain tracks need to be level and heavier window coverings need secure fixings. If the window is wide, the wall is brick or concrete, or the existing blinds have to come down first, the job can take more time than expected.

So, how much does it cost to install curtains and blinds in Melbourne?

For 2026, installation-only work can start at around $40–$120 per blind, although minimum call-out charges may apply. If you are buying the window covering and having it supplied and installed, a standard roller blind can be around $120–$400 per window, while curtains with a track can range from roughly $250–$1,000+ per window.

The number of windows, product you choose and condition of the installation area can make a big difference.

The price changes depending on what you are actually installing

There is a big difference between putting up one roller blind you have already bought and fitting curtains throughout an entire house.

For a rough Melbourne budget:

These are broad Melbourne/Victorian market figures, not fixed Get Handyman prices. Product quality, window dimensions, access, fixing surface and the number of windows can all change the quote.

There can also be a minimum charge for small jobs. For example, published 2026 Melbourne installation rates show minimum call-out charges around $200, with higher minimums applying in some CBD situations.

That means installing one $40 blind does not necessarily mean your total bill will be $40.

If you’ve already bought the blinds

This is one of the more common jobs for a handyman.

You might have ordered roller blinds online, bought Venetian blinds from a hardware store, or purchased curtains and tracks separately. The products are ready. You just need somebody to install them properly.

For straightforward blinds, $40–$120 per blind is a reasonable broad allowance for installation, although the minimum job charge can matter more when there are only one or two windows.

Before arranging installation, it helps to have:

• The blinds or curtains ready to install
• Brackets and other supplied hardware
• Product instructions
• Window measurements
• Photos of the windows
• Information about the wall or ceiling where the brackets will be fixed

If the product is missing brackets or fixing hardware, the installer may need to determine what is suitable before the job can be completed.

A roller blind is a very different job from a long curtain track

Roller blinds are relatively straightforward when the window is a normal size and there is a suitable surface for the brackets.

Current Melbourne pricing puts standard roller blinds at roughly $120–$400 per window supplied and installed. Basic products can sit toward the lower end, while larger windows, better fabrics and specialist operation increase the cost.

One Melbourne supplier currently lists standard roller blinds from about $150 installed for windows up to 1,400mm wide, increasing as the opening becomes wider.

Curtains are different.

You are paying for the curtain itself, but also potentially a track or rod, brackets, additional supports and more installation time. Large windows and sliding doors can require long tracks and heavier curtains.

For that reason, curtains with tracks can cost around $250–$1,000+ per window when supplied and installed.

What happens when you have a whole house to fit out?

This is where per-window pricing can become misleading.

Suppose a three-bedroom Melbourne home has 10–12 windows.

A basic roller-blind fit-out could be around $1,500–$2,500, while a mixture of blinds, Roman blinds, curtains or other higher-priced options can push the total to around $2,500–$5,000 or more.

The actual layout matters.

A home with ten small bedroom windows will not cost the same as one with ten openings that include:

• Large living-room windows
• Sliding doors
• Corner windows
• High windows
• Wide kitchen windows
• Double curtain tracks
• Motorised blinds

When several windows are being done at once, it is usually more useful to request a whole-job quote than simply multiplying a single-window installation rate.

The wall can affect the job more than the blind

This is something homeowners often don’t consider when looking at installation prices.

A bracket going into timber or a suitable stud is relatively straightforward.

Brick and concrete require masonry drilling and appropriate fixings. Plasterboard may need suitable anchors or fixing into a stud. Some windows also have limited space around the frame, which affects where the brackets can go.

Older Melbourne houses can present their own challenges too. You may find uneven walls, unusual window reveals or surfaces that are not suitable for the fixing method originally expected.

The installer needs to look at what the blind is being fixed to, not just the blind itself.

Wide windows and sliding doors need more planning

A small bedroom window is one thing.

A three-metre-wide living-room window is another.

As the width increases, the blind becomes heavier and the supporting components need to handle a larger load. Some wide roller blinds require stronger tubes, additional supports or a different configuration.

Curtain tracks also need to be properly supported across their length.

This is one reason why a quote based purely on “price per window” can be misleading. The actual dimensions matter.

What about Venetian and vertical blinds?

Venetian blinds sit somewhere between basic roller blinds and more expensive window treatments.

For aluminium Venetians, a broad supply-and-install allowance is around $130–$260 per window. Timber and faux-timber versions can be around $150–$500, depending on size and material. (thequoteyard.com.au)

Vertical blinds are commonly used on larger windows and sliding doors.

A reasonable broad allowance is around $180–$380 per opening, although larger openings can cost more.

These products are often chosen because they allow you to control light and privacy without taking up as much wall space as full curtains.

Curtains don’t have to be expensive, but the track matters

If you already have curtains and only need them hung, the installation cost can be quite reasonable.

Published Melbourne installation rates show standard curtain hanging from around $60–$90, while track installation can start at around $70, depending on the job. (installco.com.au)

But don’t compare this directly with the price of a complete curtain installation.

A complete job might involve:

Curtains + track + brackets + measuring + installation.

That is why a $70 hanging charge and a $500 supplied-and-installed curtain are not really competing prices. They are different jobs.

Don’t forget the old blinds

Replacing window coverings often starts with removing the old ones.

Old blinds may have to be unscrewed, curtain tracks removed and brackets taken off before the new installation can begin.

As a broad allowance, removal can cost around $20–$50 per blind, although it may be included in a larger installation quote.

If you have 10 old blinds to remove, that can become a noticeable part of the job.

When requesting a quote, tell the installer upfront that existing coverings need to come down.

Motorised blinds cost more, and there can be electrical work

Motorised blinds are useful for large windows, hard-to-reach windows and homes where several blinds need to operate together.

A broad supply-and-install range is around $400–$1,200+ per window, depending on the blind, motor, size and control system.

There is another consideration if the motor is hardwired.

Electrical work should be carried out by a licensed electrician. A blind installer can handle the mechanical installation, but hardwired electrical work is a separate consideration.

Battery-operated motorised blinds can avoid some of that additional electrical work.

Victoria’s blind cord rules are worth knowing

There is a safety issue that should not be overlooked, particularly in rental properties.

From 1 December 2025, Victorian residential rental properties must have secured cords on internal window coverings so the cords cannot form loose loops. This applies to corded blinds and curtains.

Consumer Affairs Victoria also provides free cord-safety kits for Victorian consumers.

This is particularly relevant when replacing old blinds in a rental property. Don’t assume that an older blind is automatically suitable just because it still works.

If you are a landlord or property manager, it is worth checking the current Victorian rental requirements before arranging replacement window coverings.

Curtains and blinds for rental properties

Rental properties have another practical requirement.

In rooms likely to be used as bedrooms or living areas, Victorian rental properties must have curtains or blinds that can close, block light and provide privacy.

This means window coverings can become part of a property maintenance job rather than simply a decorating decision.

For a rental, the landlord or property manager may be replacing:

• Broken blinds
• Damaged curtain tracks
• Missing curtains
• Unsafe cords
• Old window coverings
• Blinds that no longer open or close properly

Getting several windows repaired or replaced during the same maintenance visit can make more sense than dealing with each one separately.

Should you repair the existing blinds?

Sometimes replacing the entire blind isn’t necessary.

A blind that will not roll properly, a loose bracket, damaged chain, broken track or curtain that has come away from its fixing may only need a repair.

The important question is whether the main blind or curtain is still in reasonable condition.

If the fabric is badly damaged, the mechanism is worn out and several components have failed, replacement may make more sense.

For a relatively new blind with one damaged fitting, repairing the existing installation could be enough.

What should you send when asking for a quote?

You can make the quoting process easier by sending a few useful details rather than simply saying, “I need blinds installed.”

Include:

• Number of windows
• Approximate width and height
• Type of blind or curtain
• Whether you already bought the product
• Photos of the windows
• Photos showing the wall around the window
• Whether old blinds need removal
• Whether the windows are unusually high
• Whether there are sliding doors or very wide openings
• Your suburb

If you already have the blinds, photograph the packaging or product label as well.

That can help the installer understand what needs to be fitted before arriving.

When professional installation makes sense

You can install some basic blinds yourself.

The problem is that mistakes are easy to see.

A blind that is slightly crooked, brackets that are not aligned or a curtain track that sits unevenly can make an otherwise good window treatment look poorly fitted.

Professional installation becomes particularly useful when there are multiple windows, wide openings, heavy curtains, brick or concrete walls, high windows or complicated tracks.

Get Handyman provides curtain and blind installation in Melbourne, including roller blinds, Venetian blinds, vertical blinds, blackout curtains and sheer drapes. The service covers measuring, fitting brackets and tracks and checking the finished installation.

Getting your curtains or blinds installed

If you already have the curtains or blinds, you don’t necessarily need to replace them. Get Handyman can help with the installation.

For a larger job, send through the number of windows, approximate measurements and photos so the work can be assessed properly.

If you are replacing existing window coverings, mention that as well. Removing the old blinds or tracks can be included in the job rather than becoming an unexpected extra later.

Need curtains or blinds installed in Melbourne? Contact Get Handyman to discuss the job and request a quote.

Frequently asked questions

How much does it cost to install blinds in Melbourne?

Installation-only work can be around $40–$120 per blind, although minimum call-out charges may apply. If the blind is supplied as part of the job, a standard roller blind can be around $120–$400 per window installed.

How much does it cost to install curtains in Melbourne?

Simple curtain hanging can start around $60–$90, while curtain track installation can start around $70. A complete supplied-and-installed curtain setup can cost around $250–$1,000+ per window, depending on the fabric, track and window size.

How much do blinds cost for a three-bedroom house?

A three-bedroom Melbourne home with around 10–12 windows may cost approximately $1,500–$2,500 for standard roller blinds, or around $2,500–$5,000 when using a mixture of blinds and curtains or higher-priced products.

Can I supply my own blinds and pay for installation?

Yes. This is a common type of installation job. Have the blinds, brackets and supplied hardware ready before the installer arrives.

Do installers remove old blinds?

It depends on the quote. Removal is often available as an additional service and can cost roughly $20–$50 per blind.

Are blind cords required to be secured in Victorian rental properties?

Yes. Since 1 December 2025, internal window coverings with cords in Victorian residential rental properties must have the cords secured so they cannot form loose loops.

Can blinds be installed on brick walls?

Yes. The installer needs to use suitable masonry fixings and drilling methods. Brick and concrete can take more time than a straightforward timber or suitable plasterboard fixing.

Is it worth paying someone to install curtains and blinds?

For one simple blind, DIY may be practical if you are comfortable measuring and drilling. Professional installation becomes more useful when you have multiple windows, large blinds, long curtain tracks, heavy curtains, difficult wall surfaces or high windows.

Can Get Handyman install blinds that I bought elsewhere?

Yes. Get Handyman offers curtain and blind installation in Melbourne, including different types of blinds and curtain fittings.